Leukoplast® strong

Leukoplast strong is a highly adhesive water repellent bandage for short-term use on minor wounds, lacerations or puncture sites. It’s made from a flexible, breathable fabric and a highly absorbent wound pad.

  • Secure fixation
  • Water repellent
  • Highly absorbent wound pad

Product benefits

Padlock demonstrating that this product provides secure fixation, keeping dressings or other items in place.

Secure fixation

Leukoplast strong is a highly adhesive bandage providing secure fixation. This flexible fabric bandage is robust and durable. Its elasticity means it conforms to the body and stays firmly in place.
Water droplets bouncing off a surface, indicating that the product is water-repellent.

Water repellent

This dressing is water repellent for reliable protection.
Droplet-shaped outline, its lower half darkened to represent fluid management.

Highly absorbent wound pad

The wound pad is highly absorbent yet doesn’t stick to the wound, preventing further damage.
Water droplets bouncing off a surface, indicating that the product is water-repellent.

Can be worn in the shower

Being water-repellent, can be worn while showering, which means fewer dressing changes.
Air passing through the product, allowing the skin to breathe.

Breathable

Breathable and permeable to water vapor, helping to prevent maceration.

How to use

How to use Leukoplast strips
1. Remove the protective film
Hold the strip in one hand and peel off the upper protective film with thumb and index finger of the other.

2. Apply and remove the second protective film
Place the wound pad centrally on the wound. Make sure that you only touch the plaster on the protective film and the backside, never the wound pad itself. Remove the remaining protective film.

3. Smooth out and press
Smooth out the dressing so that it adheres evenly. Apply only slight pressure and avoid tension. To increase the adhesive strength, you can warm the patch between the palms of your hands before applying it.

How to use

How to use Leukoplast bandage strips
1. Cut to size
Cut off an appropriate length using a pair of clean, sharp scissors to prevent the shredding of edges and contamination.

2. Remove the protective film
Hold the strip in one hand and peel off the upper protective film with thumb and index finger of the other.

3. Apply and remove the second protective film
Place the wound pad centrally on the wound. Make sure that you only touch the plaster on the protective film and the backside, never the wound pad itself. Remove the remaining protective film.

4. Smooth out and press
Smooth out the dressing so that it adheres evenly. Apply only slight pressure and avoid tension. To increase the adhesive strength, you can warm the patch between the palms of your hands before applying it.

How to use

Overview of finger strip variants for knuckles, phalanx and fingertip
1. Phalanx
Remove the upper protective foil and place the wound pad centrally on the wound. Remove the second protective film. Smoothen down the adhesive surfaces.

2. Fingertip
Remove the upper protective foil, place the wound pad centrally on the wound and smooth the adhesive surfaces along the finger. Then remove the second protective film, fold the other half of the plaster over the fingertip and smooth down the remaining adhesive surfaces.

3. Knuckles
Remove the upper protective foil. Place the dressing on the knuckle so that the smaller cutout in the plaster points away from the body and the deep cutout towards the body. Remove the second protective foil and smoothen down.

How to use

How to use Leukoplast strips
1. Remove the protective film
Hold the plaster in one hand and peel off the upper protective film with thumb and index finger of the other.

2. Apply and remove the second protective film
Place the wound pad centrally on the wound. Make sure that you only touch the plaster on the protective film and the backside, never the wound pad itself. Remove the remaining protective film.

3. Smooth out and press
Smooth out the dressing so that it adheres evenly. Apply only slight pressure and avoid tension. To increase the adhesive strength, you can warm the dressing between the palms of your hands before applying it.

How to use

How to use Leukoplast bandage strips
1. Cut to size
Cut off an appropriate length using a pair of clean, sharp scissors to prevent the shredding of edges and contamination.

2. Remove the protective film
Hold the strip in one hand and peel off the upper protective film with thumb and index finger of the other.

3. Apply and remove the second protective film
Place the wound pad centrally on the wound. Make sure that you only touch the plaster on the protective film and the backside, never the wound pad itself. Remove the remaining protective film.

4. Smooth out and press
Smooth out the dressing so that it adheres evenly. Apply only slight pressure and avoid tension. To increase the adhesive strength, you can warm the patch between the palms of your hands before applying it.

Product specifications

PRODUCT
REF
Dimensions
Pcs./Box
Color
Features
Leukoplast® strong 7645901 6 cm x 500 cm 1 Tan
Leukoplast® strong 7645902 8 cm x 500 cm 1 Tan
Leukoplast® strong 7645905 6 cm x 100 cm 1 Tan
Leukoplast® strong 7645907 4 cm x 100 cm 1 Tan
Leukoplast® strong 7645909 1 Tan
Leukoplast® strong 7645910 2.2 cm x 6.3 cm 20 Tan
Leukoplast® strong 7645912 1.9 cm x 5.6 cm 10 Tan
Leukoplast® strong 7646005 2.2 cm x 3.8 cm 100 Tan Sterile
Leukoplast® strong 7646006 2.2 cm x 3.8 cm 100 Tan Sterile
Leukoplast® strong 7646007 2.2 cm x 7.2 cm 100 Tan Sterile
Leukoplast® strong 7646008 2.2 cm x 7.2 cm 50 Tan Sterile
Leukoplast® strong 7646010 3.8 cm x 7.5 cm 100 Tan Sterile
Leukoplast® strong 7646011 5 cm x 6.3 cm 100 Tan Sterile
Leukoplast® strong 7646012 4.4 cm x 5 cm 50 Tan Sterile

Information for use

Please make sure to always follow the instructions for use, including the safety information provided with the product. Not at hand? Find the needed safety information in this database!